TBI PRO LED LIGHT STRIP KIT WITH DC12V UL LISTED POWER SUPPLY SMD 5050 32.8 FT (10M) 300LEDS RGB 30LEDS/M AND 44 KEY IR CONTROLLER KITCHEN BEDROOM SITTING ROOM, TV BACKLIGHTING, BEDROOM, BED AND MORE
ALL IN ONE KIT: Package inluded 2 reels of 16.4ft led lights, AC adaptor, 44key IR remote and receiver box. No other accessories are required.We do not recommend to connected more than 32.8ft as the power adapter will exceed limited, and please unroll them for heat dissipation when testing more than 2 minutes. WITH HIGH TEMPERATIRE ADHESIVE: It's blue high temperature adhesive tape backing, improveing the issue that the tape getting weak during operation. It is specifically designed for good adhesion to high, medium and lower surface energy plastics, paints and glass. EASY TO INSTALL & CUTTABLE: Simply connected all the parts together and peel off the protection layer,then stick to the clean dry and flat/smooth surface.This multi color changing LED Strip Lights can be cut to every 3 leds along the cutting marks, without damaging the rest strips. MULTIPLE COLOR & MULTIPURPOSE: It' s can be change the color via the remote.20 preset colors + DIY colors. Very suitable for indoor lighting and decor. Such as kitchen, under cabinet, dining room, bedroom, party, wedding...ect
Continuous length, packed with 5 meter.Long life span 50,000+ hours and Low power consumption. Run on DC12v. Safe and reliable.
Cuttable every 3 LEDs along the cutting marks, according to requirement.
Connectable，use a L shape or extension connector if you need to slice the strip.
With back adhesive. Can be stick to anywhere you want to place.
With brightness control,mode selection,and color selection.
Input voltage: 12V DC
Max output current:2A/ each channel
Control mode: IR
Output: 12V DC, 3 * 2 A
Connect mode: Common Anode
Work temperature: -20~60 degree
Control distance: 5M (must be poniting at the sensor without any obstacles)
Led Strip Light & Power Supply
Color:RGB LEDs Number/M: 30 pcs/m; total 150leds
Input: 100-240V AC 50/60Hz
Max Current: 5a
Max Wattage: 60W
2 x 5M led strip light
1 x Power supply
1 x 44key remote control
1 x Ir receiver
The connections must be in towards to the arrows.
Don't left them on the spool when you testing them more than 2 mins. They need to dissipating heat.
Clean the surface before stick on the strip.If it is not sticky enough, you can add some double sided tape.
The ventilation must be ensured.These lights need an excessive amount of airflow for cooling.
Please don't stick the lights to metal surface that conductive. It may cause a short-circuit on the strip light.
Widely used for home decoration use, hotels, clubs, shopping malls
Emergency & security lighting, advertisement sign lighting
Decorative lights for holiday, event,garden, show exhibition
0 review for TBI PRO LED LIGHT STRIP KIT WITH DC12V UL LISTED POWER SUPPLY SMD 5050 32.8 FT (10M) 300LEDS RGB 30LEDS/M AND 44 KEY IR CONTROLLER KITCHEN BEDROOM SITTING ROOM, TV BACKLIGHTING, BEDROOM, BED AND MORE